4 x 800kg 4m Ratchet tie down lashing straps 1-piece tensioning belts ratchet straps

4 x professional lashing strap 1-piece

Our belts are manufactured for us and marked with our labels (Brand and manufacturer: Oliver Kühn / Industrie PLANET)

Our belts comply with DIN EN 12195-2
All legally required information can be found on the labels

(ATTENTION: Belts are only permitted for securing the load if they comply with this DIN standard)

Total length: 4 meters
belt width: 25 mm
One-piece
Manual force SHF: 50 daN (50 kg)
Preload force STF: 100 daN (100 kg)
LC strapping tensile force: 800 daN / kg (0.8 tonnes)
LC straight tractive force : 400 daN / kg (0.4 tons)
Colour: orange
Material: Polyester
Label with certificates and standards
Din / Standard: EN 12195-2

The optimal belt for securing your load.

Do not play with your life and that of your fellow men!!!

Belts should be checked regularly for cracks and wear and tear and should be replaced immediately in case of damage. Only then is optimum use guaranteed.

!!! Attention: Belts are not suitable for lifting loads!

4 pieces tension belt 800 kg 4m, belt width 25 mm one-piece. Strap and ratchet. Metal handle, no plastic. Longer durability
Standard EN12195-2 !!! IMPORTANT !! Our belts for load securing meet the legal requirements. Label with all legal notices on the webbing
The entry lashing strap for almost every use. No matter if hobby camper transporter or forwarder. For the easy strapping of cargo in the trailer semi-trailer
The strap is placed around the bundle and then the lashing strap is pulled through the metal ratchet and tightened with the lever until the tension is reached
Industry PLANET stands for load securing with responsibility: Whether you are a camper, caravan driver, haulage contractor or truck driver, you will always receive very good and consistent quality from us